Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - manitou210

Pages: [1]
1
Centerfire Discussions / 30 BR Build completed with targets
« on: July 14, 2015, 09:08:09 AM »
 Picked up a 1/18 twist barrel 1.250 strait Kreiger for $325 in Canada,bought a Rem 700 sold new barrel so action net was $ 400 was down south and sent action to GreTan rifles and he did a great job truing, and bushed firing pin hole as well put in a light firing pin. Picked up a old wood 40x stock, bedded it.
 Prepped some Lapua brass, neckturned them  and sent 3 brass to Manson to make me a reamer. Had VX systems Ian Robertson put it together
only could get Berger 115 gr and some 4198 powder and worked load at 3050 fps shot a 5 shot group at .131" had a 8 to 32 x Sightron and have now upgraded to a 10 by 50x Sightron
here are results shot at 200 yards at a 100 yard hunterclass target
 Will have to do some work to get it down to HV Varmint class,lighter stock and maybe cut barrel back its at 26"






2
Rimfire Discussions / Re: RimFire BR Southern Ontario?
« on: July 14, 2015, 08:43:13 AM »

The cut off entry has been lifted so walk on is open
40 shooters entered
manitou

3
Beachburg - Ottawa River Sportsman's Club might be the finest rifle range in Eastern Canada 50y 100y and 200 y ranges all covered three sides. The Club has held the Provincial rim fire Championships many times and 50 y range has backers on targets.
We are working hard acquiring prizes for Prize table and will post soon here.
Your commitment to attend would help.

To mail in your entry info to;

Barry Nieuwenhuis
Box 320
Beachburg, Ontario
K0J 1C0
Tel: 613 582 3857

Or Bill Mc Donald
email: ddonald@nrtco.net


Email; ddonald@nrtco.net


4
Club Events / Re: Benchrest Shoot July 25/15
« on: March 31, 2015, 07:03:36 AM »
Date on poster is wrong should be July 25 /2015
Thanks
manitou

5
Club Events / Benchrest Shoot July 25/15
« on: March 10, 2015, 01:01:30 PM »

6
Centerfire Discussions / Re: 30BR Robinett Information
« on: March 10, 2015, 12:54:07 PM »

http://www.accurateshooter.com/cartridge-guides/30br/


Hodgdon 4198   34.7   BIB 112   3050 fps   Bit Faster than 118s
Vihtavuori N130   34.7   BIB 112 moly   3000 fps   Kostyshyn Prefers N130
Accurate AA2015   33.0+   BIB 112   2950 fps   “Old” lots best
Hodgdon 4198   32.7   BIB 118   2950 fps   Robinett Data
Hodgdon 4198   33.5   BIB 118-7   2985 fps   Nyhus Load
Vihtavuori N130   34.3   BIB 118   2950 fps   Accurate, Low SD
Hodgdon 4198   34.2   BIB 118 moly   3000 fps   Entrekin Match Load
Hodgdon 4198   34.8   BIB 118   3052 fps   Robinett Data
Hodgdon Benchmark   36.0   Cheeks 118   2990 fps   Very Accurate
Hodgdon 4198   34.5   BIB 125 moly   3000 fps   Entrekin 125gr Load

7
Photo And Video Gallery / Re: New Rifle pics to share
« on: January 09, 2015, 04:54:57 PM »
Just wanted to share a sister stock of yours




8
 Anyone in Ontario selling targets

9
BR Equipment + Components / Re: Peter Dobson - Hirsch Precision
« on: January 09, 2013, 04:09:41 PM »
 I see Peter is no the Canadian dist for Stiller actions

10
My friend shoots a 6.5x47 lapua he shot the most bulls at Canadian National F class year at Connaught
 I know he uses RL 15 and 130gr Bergers, The 142 sierras and Bergers are very good as well but not enough speed for 1000 yards the 130s work best

11
Centerfire Discussions / Re: 1st time on site couple questions
« on: March 08, 2010, 09:41:59 AM »
Hi Guys & Gals Correct me if I am wrong HV varmint weight is 13.5lbs. Does anyone shoot 223rem in benchrest or is it dead like the deuce?
 I used to shoot hunter class in 70s with a deuce and then .308win a lot of other shooters where using 6x47 and some where building 6ppc and then benchrest kind of died in Ottawa area.
 I shoot some Fclass with friends who shoot the fasttwist, .223rem some Hart barrels Kriegers 28" and factory Savages all with 1/7twist.
 These dam fasttwist really shoot using 80gr bullets, I have seen quite a few 5 shot groups at 300y under
.600 smallest .510" , but the 90grs testing loads trying to get in the high 2800fps, using slow powders like Vt 540, 550, Rl 15 where really tight at 300y would they compete with guns used today in Benchrest.
 My problem will be making weight limit with 30" barrel build is almost done have to weigh everything
manitou
#1 who did you shoot with in the Ottawa area? I shot at Stittsville in the late 70 and early 80's. #2 the max weight for a VFS or the rifle you shoot would be 13.5lbs. #3 .308 for short range benchrest if group or score, forget it. #4 .223, well I am going to piss off some people, but I would take it, over a .222, I shot a .222, .222-35, .222-45 and I had to write an article about a shooter taking a factory rifle and turning it into a target gun and the bull barrel Rem 700 in a .223 exceeded my expectations #4 A BR is the way to go at 600yds, from what I have been told. #5, 7 twist for short range is "NOT" going to do it  #6 Could this rifle run with a PPC, ain't going to happen. #7 The short variants of the .22PPC are good  until they run into conditions, then kiss them goodbye.
Bill
#1 shot with Toni, Karel VanDuyse, Garry Fields, Clint Benedick,Jim Dick(passed) Americans that shot at some shoots where Clyde Hart, Walt Berger, Dick Brownell, can't remember last names sorry, and many other shooters
#2 thanks for confirmation of weight
#3
On your quote of .308 I assume is for absolute smallest groups ! I shoot Hunter class benchrest and they don't plug to 30.cal, and the 30br and strait .308win are the big dogs winning most shoots. friend has a tack driving 6mmbr made up by Hart and choses to use his .308win big hole gets more Xs and win more often.
#4 I would agree
#5 Your right 1/12 or 14 probably best.
#6 Bill I would have to disagree here there are two fellows shooting 6ppc in LV, Harts & Kriegers customs,and at 200 they are similar to 223 and do win more times,in nice conditions, but not than mutch better than 223,
But
at 300y the 223 fast twist heavy Bergers owns them when there are any conditions and just med light conditions
#7 I have not seen anyone with short cartridge 224, I am sure the would work, I know the stubby short cartidges are very good had  Hart barreled 7mmwsm just sold that was amazingly accurate, but recoil is not for my old bones.
Manitou


12
Centerfire Discussions / Re: 1st time on site couple questions
« on: March 01, 2010, 02:34:26 PM »
 Was at range yesterday and my friend was shooting his 223 rem with bergers at 300y he shoots consistantly under 1" 5 shot groups but this three shot was some what stunning to say the least.
 He has a 28" Kreiger 7.7 twist to shoot 90gr Bergers for F/TR class out to 1000y or 9000m

I lent out my benchrest calipers and just use reg ones so I could be out on measurement probably a little to small.center to center.
 Do you not think with a BC of 551 that the 223 could run with the 6mmppc or 6mmbr.
I am thinking of putting a fast twist 224 barrel on a trued 700 action I have
 It seems to me there is not anyone shooting any 300y benchrest mostly 100 & 200
manitou

13
Centerfire Discussions / Re: 1st time on site couple questions
« on: February 20, 2010, 10:03:38 PM »
Hi Calvin
I have a Barnard action with 30" Tru Flyte 1/7 twist,HV contour and Robertson benchrest stock, the scope is quite heavy it is a Nightforce Benchrest, gun is noty quite finnished yet Ian is bedding it this week and will instale, jewell trigger I know it will be under 6.5 kg for FT/R class
 thanks Guys for replys guess I will have save some coin to build 6ppc or maybe just pull out my old 222 and at least get some shooting in
manitou

14
Centerfire Discussions / 1st time on site couple questions
« on: February 20, 2010, 05:37:54 PM »
 Hi Guys & Gals Correct me if I am wrong HV varmint weight is 13.5lbs. Does anyone shoot 223rem in benchrest or is it dead like the deuce?
 I used to shoot hunter class in 70s with a deuce and then .308win a lot of other shooters where using 6x47 and some where building 6ppc and then benchrest kind of died in Ottawa area.
 I shoot some Fclass with friends who shoot the fasttwist, .223rem some Hart barrels Kriegers 28" and factory Savages all with 1/7twist.
 These dam fasttwist really shoot using 80gr bullets, I have seen quite a few 5 shot groups at 300y under
.600 smallest .510" , but the 90grs testing loads trying to get in the high 2800fps, using slow powders like Vt 540, 550, Rl 15 where really tight at 300y would they compete with guns used today in Benchrest.
 My problem will be making weight limit with 30" barrel build is almost done have to weigh everything
manitou

Pages: [1]
SMF spam blocked by CleanTalk