Benchrest In Canada Forum
May 26, 2018, 12:45:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length

  Home Help Search Login Register  
  Show Posts
Pages: [1] 2 3 ... 10
1  News / BRSC - Benchrest Shooters Canada / Re: Mission, BC - BRSC Sanctioned HV Group Shoot - May 6, 2018 on: May 07, 2018, 08:22:18 PM
Mark thank you the match report.
Thank you to all the organizers and support folk for the match.
It was nice to get the first BRSC event under the belt.
2  Classifieds (Buy and Sell) / BR Equipment + Components / Re: wtb arbor press on: May 07, 2018, 04:30:45 PM
Have a Harrell’s in stock.
3  Classifieds (Buy and Sell) / BR Equipment + Components / Re: ISO Rem700 SS recoil lug .// 6mm blank or BR barrel/ jewel to fit same 700 on: March 01, 2018, 08:37:35 AM
Call Dan @ 403-752-4446.
4  BR Discussions / Centerfire Discussions / Re: Neck size diameter on: February 10, 2018, 09:08:38 AM
As was stated above neck clearance of .002” is a good target.
If you accurately measure the brass from each chamber you will see how much it differs from each other.
We normally measure the neck, shoulder and base dimensions of the fired and sized brass as the way to match up the sizing die to the chamber. One measurement that doesn’t get the attention it should is the shoulder (tapered part) bump back. It is common to see the dimensions over sized which effects the headspace clearance on sizes brass.
In a target type rifle this should again be in the .002” range of bump back. In a hunting rifle a bit more bump back is recommended to handle adverse environmental conditions.
The closer you can match the sized brass back the chamber dimensions the better it aligns the projectile to the bore.
5  News / Club Events / Re: Mission & District Rod & Gun Club Center Fire Benchrest Schedule 2018 on: January 08, 2018, 08:42:25 AM
I believe Phil Nick is planning on attending.
6  News / Club Events / Re: Mission & District Rod & Gun Club Center Fire Benchrest Schedule 2018 on: January 04, 2018, 08:05:13 AM
Thanks guys, have a couple of events penciled in.
7  General / About This Forum / Re: 8 years! on: December 25, 2017, 11:05:42 AM
Rick, keep it going, we enjoy the site and all that it offers.
8  Classifieds (Buy and Sell) / BR Equipment + Components / Re: WTB 6ppc reamer .262 on: November 18, 2017, 08:11:30 AM
Curious as to why the interest in a .262" neck?
In the last few years the the majority of reamers are in the .268-.269" range.
If you have a specific reamer dimension you would like you can order one to those specs. without any additional cost.
9  News / BRSC - Benchrest Shooters Canada / Re: July 15/16 BR Stampede Shootout 100 yd 4-Gun (Sp, LV, HV, Unl) on: July 08, 2017, 08:36:21 PM
We will be there.
If any shooter need products delivered get in touch with us before Thursday.
10  News / BRSC - Benchrest Shooters Canada / Re: BRSC National Championships July 1/2 2017 - Selkirk, MB on: July 05, 2017, 05:09:36 AM
Thank you to the Selkirk Club for hosting an excellent shoot.
Congratulations to Phil on his winning the BRSC Nationals.
11  BR Discussions / Centerfire Discussions / Re: Is There Consensus on Minimum Amount of Neck/Bullet Contact? on: June 04, 2017, 11:37:00 AM
The amount of bullet in the neck is not a real big concern. With powders like N-133 which seem to like lots of neck tension on the bullet to aid in pressure curve, may be a slight issue.
As you are not using the magazine to feed, I would not worry about the amount of bullet in the neck, just feed the rifle what it shoots well.
If the bullets are flat base you should be fine, a boat tail will have less neck grip due to the reduced bearing surface.
With the dies you are using you should still be able to make minimal runout loads.
I once had a 40XBR that had .010" of bullet grip on a .223 50gr Berger bullet.
It shot pretty good.
You may find that your rifle may like a wee bit of bullet jump, so do test that option.
12  News / BRSC - Benchrest Shooters Canada / Re: Rosebud Heavy Iron Shoot June 10/11 - 2017 on: May 30, 2017, 11:39:24 AM
Count me in.
13  News / Club Events / BR 201 on: April 23, 2017, 09:10:58 AM
Thank you to Rick, Hugh, Wayne and their wives for hosting a great event at the Rosebud range on Saturday.
My feed back is two thumbs up, and the fellow participants that I talk with, all had nothing put positive feed back about the days events.
Wayne provide a new level of understanding about the BR game which was/is muchly appreciated.
Thanks again to all involved.
14  Classifieds (Buy and Sell) / BR Equipment + Components / Re: WTB 222 Magnum dies on: February 04, 2017, 09:38:08 AM
Let me check into that for you.
15  Classifieds (Buy and Sell) / BR Equipment + Components / Re: WTB 222 Magnum dies on: January 28, 2017, 12:17:41 PM
Any of the Redding dies you may need.
16  Classifieds (Buy and Sell) / BR Equipment + Components / Re: WTB 222 Magnum dies on: January 27, 2017, 01:01:44 PM
If you don't find any die let me know and I should be able to get you some new Redding Dies.
17  BR Discussions / Centerfire Discussions / Re: Returned 6NIA on: December 27, 2016, 09:36:07 AM
I had sent in a Form 6 in after June 16th, and my normal application information was rejected due to smokeless powder and primers being listed on the form.
I called in the find out why this was now an issue, in was told as of June 16th, smokeless powder was classified as an explosive.
My research on the subject did not show that smokeless powder or primers falling in the US explosives list.
I called in to get clarification and pointed out this point, they followed up on the question and got back to me with the response that the ATF considered smokeless powder an explosive as one of its components was listed in the explosive category.
I removed these two items from the form 6 and it was approved.
My other question was how one would be able to take powder and primers south, they suggested that I look into an explosive licence. I have not checked out the process or cost yet.
18  General / Off Topic / Re: Hello all,, new old guy from Calgary Ab on: December 26, 2016, 01:54:00 PM
Welcome to the forum, enjoy the visits, and do not be afraid to ask any questions you may have about firearm accuracy.
19  General / About This Forum / Re: 7 years! on: December 24, 2016, 09:11:57 PM
Keep it going Rick, still check in on a the site daily.
20  General / Off Topic / Re: What is a frozen scope? on: November 20, 2016, 07:13:27 AM
Another point to coincided is weight, most external adjustable mounts add weight.
Pages: [1] 2 3 ... 10
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!