Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - elpolliano

Pages: [1]
1
Optics / Sightron 10x50x60
« on: May 23, 2023, 03:29:00 PM »
Hello have a new and never mounted Sightron SIII.

Has the 1/8" target dot and 1/8 MOA adjustments.

Comes with flip up caps where as the older ones came with a scope sleeve...

1500$ plus shipping.

2
Rifles / Anschutz 1712 silhouette
« on: August 12, 2022, 03:35:40 PM »
I have an anschutz 1712 silhouette with 3 mags and a leupold vx3i 6.5x20 e.f.r. scope sitting in high talley rings.

Looking to get 2800$ so that's well over 1000$ off from New

Getting away from anything bon benchrest as I don't have time for it all. Figured this would be a good forum to sell a higher end 22.

Can send more pics via email or text

3
BR Equipment + Components / 284 win barrel, dies and brass. For panda action.
« on: June 26, 2022, 01:45:02 PM »
have a complete setup for a pand fclass action in .284

kreiger 284-4 groove 7.5 twist with 350 rounds down the barrel.
77x 6.5x284 lapua brass necked up to 7mm zero shots on this brass and the brass is in 2 mtm ammo cases.
Redding 284 s.b. body bump die
reddind B/Fl die
wilson 6/6.5/.284 deprime and neck sizing die
and a wilson ss inline micrometer seater die.


800$ plus shipping.

4
BR Equipment + Components / 6.5x47 package
« on: June 01, 2022, 09:06:25 AM »
have the following package for 6.5x47 lapua

Redding full length type s and match micro seater (339$ FROM X RELOAD)
100 Lapua brass (175$ from Tesro)
1000 box of 123 grain Lapua scenar bullets (540$ from prophet river)
8x 100 all matching lot of 123 grain scenar bullets (56$ a box from tesro)

total package cost me 1530$ plus the usual shipping and tax.

would like to get 1200$

shipping is on the buyer but I am on Vancouver island so could arrange a meet up.

5
Centerfire Discussions / Stock tape
« on: November 27, 2021, 09:44:37 AM »
Hello, does anyone know where I might find some stock tape in canada. I am able to find it on American websites but can't find any north of the border, that or even wider seats of uhmw tape.


Thank you.

MP

6
Optics / Leupold mark 4 ltr
« on: November 15, 2021, 01:10:21 PM »
Leupold mark 4 with duplex retical 4.5x14x50 with aluminum flip up caps and nightforce rings.

1100 shipped

7
BR Equipment + Components / Trigger tech diamond
« on: November 01, 2021, 02:34:40 PM »
Trigger tech diamond Trigger right hand safety no bolt release.
Curved blade, will ship in original box.

275$ will cover the first 15$ worth of shipping.

8
Centerfire Discussions / Loading at a match.
« on: October 20, 2021, 12:52:40 PM »
So after watching some of the you tube interviews I'm curious as to how many of you load at a match and what your techniques are and what type of scales and presses you use.
I am set up to have all my rounds pressed long and can adjust seating depth at the range but am wondering if it's worth while to bring an auto charge and scale type set up or just a nice thrower with a gem pro 250 and a trickler exc.

Thanks 😊

MP

9
Rifles / Wichita 6ppc
« on: September 11, 2021, 08:55:20 PM »
Sold 😀

10
Rifles / Bat sv benchrest stock
« on: July 21, 2021, 09:31:05 AM »
Hello,

Someone has just posted a bat on anther forum but it is in a more of a varmint type stock... by any chance does someone on here have a benchrest stock inleted for a bat sv that they are not using?

That being said I have a Mcmillian a5 inleted for panda fclass that I might end up wanting to sell when my klp Comes from kelblys.

Thanks for time

Mike P

11
BR Equipment + Components / 308 components approximately 1200 bullets
« on: July 13, 2021, 11:43:44 AM »
Hornady

Grain. Count.

168 match x300
155 match x117
168 amax x134
155 amax x193

Speer
125 tnt x228
168 bthp x300

100 once shot lapua brass
147 once shot winchester brass full lenght sized trimmed and sonic Cleaned
79 once shot winchester brass unprepped
50 twice shot winchester brass unprepped
Rcbs neck sizer and bullet seater
Rcbs full lenght  sizer and bullet seater

Not exactly benchrest components but I will no longer be shooting 308
 
Looking  to get 525$ plus shipping
This is kind of a miss mash of stuff but have to try and make space...

Would be willing to trade for 6mm or 6.5 bullets or if you have barrels for an unfinished project.

Thanks for your consideration.

12
Rifles / Savage fclass items listed separately package price reduced
« on: July 07, 2021, 12:52:47 PM »
Please remove

13
Centerfire Discussions / Rebel action
« on: July 01, 2021, 10:17:39 AM »
With how little most firearms outlets in canada cater to benchrest shooting I am having a lot of trouble sourcing an action for a short range ppc. After talking with kelbley and bat as well as Bruno supplies I'm wondering if there is any alternative to the actions that I can use. One I have been looking at is the defiance rebel as it can be configured just about any way you could possibly want. This is probably a dumb question but is spending the extra money plus all the imports ext. Worth it.....

14
BR Equipment + Components / Farley coaxial front rest.... SOLD ....
« on: May 27, 2020, 09:08:34 AM »
Hey have a Farley coaxial front rest with standard base and bubble level on the bag holder. Has some minor bluing wear on the post from being used but other then that in excellent shape. Also comes with spare pinion gear would like 1300$ and we can split shipping.

15
BR Equipment + Components / Anschutz 1907 with harrel tuner
« on: March 04, 2020, 11:12:47 AM »
Anschutz 1907 in a br 50 stock has a harrel tuner on it. Professionally bedded by Dennis.s on Vancouver island. You can check my scores for June and July in mission on this sight. 2500$ plus shipping. Most guys are going full custom but if you want a leg in here you go......

Pages: [1]
SMF spam blocked by CleanTalk