Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - hendershot

Pages: [1]
1
Club Events / 2025 King Of The Hill?
« on: March 05, 2025, 06:10:02 PM »
Hi Everyone,

Will we see the King of the Hill match return this year? I missed it in 2023 and I don't see any evidence of a shoot in 2024. I sure enjoyed myself though and love to see it return this year.

2
BR Equipment + Components / 30 BR Package SOLD
« on: December 27, 2021, 03:36:14 PM »
I'm getting out of the 30 BR game and selling what I have left.

- Kreiger 17 twist, HV #17 contour, 22" barrel. Round count exactly 561. Came off a Bat 3L action, coned bolt face.
- Manson chamber reamer and matching FL sizing die reamer. 3 barrels cut. Ask for reamer print.
- 35 ready to go Lapua cases.
- Any left over projectiles I may have.

$550 plus shipping. SOLD

I would trade for a .284, 9 twist, MTU contour, 32" barrel blank. Krieger, Bartlein, Benchmark etc. I'm flexible on the specs except for the caliber.

3
Optics / Harrell's 30mm Scope Rings High
« on: January 11, 2021, 02:50:26 AM »
I'm looking for a set of aluminum rings to fit my Panda dovetail. Harrell's, Kelbly, etc. 30mm, single screw, high or around 1.5". Thanks.

4
BR Equipment + Components / WTB Bat 3L rear entry action wrench.
« on: February 05, 2016, 09:26:43 PM »
Anyone have a spare action wrench for a Bat 3 Lug they'd like to sell?
Thanks, Dan.

5
Centerfire Discussions / Record 6NIA processing
« on: January 16, 2015, 02:28:48 PM »
So this morning I sent in my 6NIA but wasn't too concerned about the usual delay in receiving the application back because my current form 6 doesn't expire until April 13. I sent 2015's application in at 09:44 and received my approved copy back at.....wait for it.......13:40 today! Whoa. If I wasn't so surprised by the outcome I'd be bitching about losing 33% of value from my 2014 form 6. Hopefully the rest of you who haven't submitted your application yet, have the same luck as me. Dan H

6
BR Equipment + Components / WTB: Bat 3 lug.
« on: December 19, 2013, 05:57:05 PM »
Used or new. Would prefer multi-flat but will settle for round.
Thanks, Dan.

7
Centerfire Discussions / 6ppc fire forming alternatives
« on: February 06, 2013, 07:47:40 PM »
Hey guys. What are your thoughts on fire forming using a wax plug and pistol powder? The theory is good but how does it work in practice?

8
Club Events / Phoenix Nationals
« on: September 04, 2012, 11:16:04 PM »
Well it looks like I'm in for the upcoming Nationals in Phoenix in October. Just wanted to get an idea of who is planning to attend. I know Rick and Hugh are but is there anyone else?

9
BR Equipment + Components / WTB Harrell's #4 die
« on: July 17, 2012, 11:56:34 AM »
Hey guys. If anyone has a spare Harrell's #4 FL die kicking around they'd like to sell let me know. Thanks, Dan.

10
Centerfire Discussions / Double clicking on extraction
« on: July 05, 2012, 06:49:15 PM »
Hey guys.

So I'm still having problems with case extraction in my Panda. The problem is noticeable after about 10 to 12 firings. At the end of the weekend I can barely extract the case. Needless to say having to pull hard on the bolt handle really upsets a guys rhythm and the rifle in bags! Throughout a two day shoot I will adjust some shims to keep the case sized properly but eventually that doesn't help. I had this problem using a Redding SB die. I then sent a few fired cases to Harrell's and they sent me back a #2.5 die. Same problem. A sized case with the #2.5 die measures the same at the case head as does a fired case I recently realized. Not even .0005" difference from what I can see. Would a #4 Harrell's die be the answer or is that a little to tight?  Thanks, Dan H

11
Club Events / Tacoma April 6
« on: April 06, 2012, 10:46:15 PM »
Just a little note from Tacoma. Great practice day today. Blue bird this morning but the mercury read 37 so a little cold. It didn't warm up much, at least in the shade as my nose never quit running. It was probably around 50 in the sun this afternoon. Everyone was giving me a hard time as I shouldn't be such a wimp coming from Alberta.  ::) Great bunch guys as you all know. It was nice to put some faces to the names.

Conditions were tough. Very switchy but there was a prevailing condition I found that would hold for 2 and sometimes 3 shots. We'll find out tomorrow if I truly found my tune or I just got lucky today with some of my 200 yard groups.  :-\




12
Centerfire Discussions / stuck primers
« on: March 17, 2012, 06:11:16 PM »
I'm sure we've all had the problem that when we resize our cases the primer gets stuck on the decapping pin and gets drawn back into the primer pocket a little preventing the case from being withdrawn from the shell holder. Talk about frustrating! Is there a clever trick to prevent this? This has happened with my Redding SB die and now my Harrell's die. I've considered filing the taper off at the pin tip hoping it would prevent the tip from getting stuck in the anvil. I'd rather not attempt this until I have a replacement decap rod assembly in case some unforeseen problems arise. Any thoughts? Dan

13
BR Equipment + Components / Panda bolt tool
« on: August 28, 2011, 03:34:22 AM »
Hey guys. I'm looking for the tool to remove the firing pin assembly from my Panda bolt. Anyone have an extra laying around?
Thanks, Dan H

Pages: [1]
SMF spam blocked by CleanTalk