Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hendershot

Pages: 1 ... 4 5 [6]
101
BRSC - Benchrest Shooters Canada / Re: Rosebud - AB Provincials LV/HV June 9/10
« on: June 10, 2012, 10:53:59 AM »
I hate to do it but I tend to agree with Bill.  ;) I sure hope the weather is better for the Nationals because I had to move mountains to arrange my schedule around the shoot. Short of the road washing out I'll be there regardless of weather, if only to practice.

102
BRSC - Benchrest Shooters Canada / Re: Rosebud - AB Provincials LV/HV June 9/10
« on: June 09, 2012, 05:27:13 PM »
Well that sucks!

103
BRSC - Benchrest Shooters Canada / Re: Rosebud - AB Provincials LV/HV June 9/10
« on: June 07, 2012, 09:18:09 PM »
Sorry I'm going to miss it. Kind of stuck down here in the jungles of Peru at this moment. I'll be home for the Nationals though. Good luck everyone!

104
Photo And Video Gallery / Re: Weekend Range Project
« on: June 06, 2012, 08:35:32 AM »
Quote from: DanO on June 05, 2012, 08:38:35 PM
I still want to know who has a shooting stool tall enough for that bench???

Thanks Dan. I'm at the airport now and needed the chuckle to lighten my mood.

Nice, peaceful looking spot you have there Calvin.

105
Centerfire Discussions / Re: BR 101
« on: May 28, 2012, 08:15:02 PM »
Damn sorry I missed it guys. I actually flew in on Saturday but arrived a little too late in the afternoon to make it out to the range on time. Perhaps next year Rick. Sorry.  :'(

106
Centerfire Discussions / Re: Spring Weather
« on: April 26, 2012, 06:50:22 PM »
Try sending me an email through this site. Click on my profile. My email address is posted there.

107
Centerfire Discussions / Re: Spring Weather
« on: April 24, 2012, 10:04:06 PM »
It's changed.
hend238@shaw.ca

108
Centerfire Discussions / Re: Spring Weather
« on: April 24, 2012, 08:15:47 AM »
Quote from: bedrock on April 21, 2012, 10:47:07 PM
Dan, have you got that 6.5 up and running?

Yes I do actually. I've only started load development though and at the point in the process where I'm trying to find the accuracy nodes. I haven't even shot any groups yet.

109
Centerfire Discussions / Re: New Canada Customs Procedure
« on: April 24, 2012, 08:13:56 AM »
Thanks for the heads up Rick.

110
Centerfire Discussions / Re: Spring Weather
« on: April 15, 2012, 09:11:50 PM »
Sorry Rick. Worked till midnight on bathroom renos Saturday night and right back at it early Sunday morning. I had good intentions of coming out but I was in the groove. My reno motivation has been lacking lately so I decided to roll with it. I've actually been doing a lot of shooting lately regardless of weather or temp. I enjoy the colder days as no one ever comes out to shoot and we all like to have the range to ourselves don't we.

111
Centerfire Discussions / Re: Spring Weather
« on: April 14, 2012, 09:01:25 PM »
What time you heading out Rick?

112
Club Events / Re: Tacoma April 6
« on: April 07, 2012, 08:14:41 PM »
Nope just me. Had my ass handed to me today! 100 LV wasn't too bad. Just missed small group by about .020" I think. I shot a .134" but the rest of my groups were in the low 4's and high 3's. 200 was a disaster! Strong gusty winds and those damn berms are hellish! I was lucky to put down a .600. A 1.000 was more my style today. Most times I would miss a condition on two shots and open my group up 1/2" or greater. I was lost to be honest. Oh well I'm having fun, didn't finish last and tomorrow is a new day. Oh and I ordered two "Uppy/Downy flags from Rick Graham today just to use at Tacoma after witnessing what can happen on this range today.

113
Club Events / Tacoma April 6
« on: April 06, 2012, 10:46:15 PM »
Just a little note from Tacoma. Great practice day today. Blue bird this morning but the mercury read 37 so a little cold. It didn't warm up much, at least in the shade as my nose never quit running. It was probably around 50 in the sun this afternoon. Everyone was giving me a hard time as I shouldn't be such a wimp coming from Alberta.  ::) Great bunch guys as you all know. It was nice to put some faces to the names.

Conditions were tough. Very switchy but there was a prevailing condition I found that would hold for 2 and sometimes 3 shots. We'll find out tomorrow if I truly found my tune or I just got lucky today with some of my 200 yard groups.  :-\




114
Centerfire Discussions / Re: BR201 - Jack Neary - Calgary
« on: March 31, 2012, 07:04:31 PM »
Thanks very much Rick for organizing this clinic. I appreciate the effort you take in promoting Benchrest in Canada and putting together a clinic of this caliber. I truly feel that I walked away today with information and insight that will take me to the next level in my shooting ability. Even though I didn't win the draw for the new barrel, it was a fantastic day.

115
Centerfire Discussions / Re: ATF form 6
« on: March 19, 2012, 08:07:06 PM »
I just faxed mine in this morning. Sure hope I get it back in time to make the April 7/8 shoot in Tacoma. I'm not holding my breath.

116
Centerfire Discussions / Re: stuck primers
« on: March 17, 2012, 10:40:50 PM »
Great thanks for the advice Phil. I have nice little piece of india stone that will work perfectly.

117
Centerfire Discussions / stuck primers
« on: March 17, 2012, 06:11:16 PM »
I'm sure we've all had the problem that when we resize our cases the primer gets stuck on the decapping pin and gets drawn back into the primer pocket a little preventing the case from being withdrawn from the shell holder. Talk about frustrating! Is there a clever trick to prevent this? This has happened with my Redding SB die and now my Harrell's die. I've considered filing the taper off at the pin tip hoping it would prevent the tip from getting stuck in the anvil. I'd rather not attempt this until I have a replacement decap rod assembly in case some unforeseen problems arise. Any thoughts? Dan

118
BR Equipment + Components / Panda bolt tool
« on: August 28, 2011, 03:34:22 AM »
Hey guys. I'm looking for the tool to remove the firing pin assembly from my Panda bolt. Anyone have an extra laying around?
Thanks, Dan H

119
BR Equipment + Components / Re: harrell combo press
« on: September 01, 2010, 01:28:24 PM »
Wayne does not have the press anymore. I saw him 2 weeks ago and was informed that it was sold. Good luck with your search.

Dan

Pages: 1 ... 4 5 [6]
SMF spam blocked by CleanTalk