1
ORSA - Ontario Rifle Shooters Association / Re: Robb MacLennan 2 gun Winner
« on: October 07, 2024, 04:01:11 PM »
Well done Rob.
Where Precision and Accuracy Meet
News:
NEW USERS MUST CONTACT RICKPOLLOCK@SHAW.CA BEFORE LISTING ITEMS FOR SALE
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
BRSC - Benchrest Shooters Canada / Re: Kenora Score Match August 26/27
« on: August 30, 2023, 08:30:29 PM »
Good weekend, no mistakes allowed with this group.
3
BRSC - Benchrest Shooters Canada / Re: 2023 BRSC Nationals Update
« on: August 01, 2023, 08:25:43 AM »
Congratulations are in order, great shooting Steve, Grant sure made it interesting.
4
Optics / Brackney Leupold
« on: May 20, 2021, 08:35:12 AM »
Leupold 40 X Competition, 1/8 dot reticle.
Frozen by Bob Brackney.
Brackney micrometer mounts.
$1400.00
Frozen by Bob Brackney.
Brackney micrometer mounts.
$1400.00
6
BR Equipment + Components / Re: WTB 30 BR reloading items
« on: November 30, 2020, 07:45:38 AM »
Hugh's barrels are quite fast on delivery.
What twist are you going with Cal ?
What twist are you going with Cal ?
7
BRSC - Benchrest Shooters Canada / Re: BRSC Canadian Benchrest Records
« on: November 11, 2020, 08:10:32 PM »
Maybe it will our turn next time, one can always hope.
Congratulations guys, on some fine shooting.
Congratulations guys, on some fine shooting.
8
BRSC - Benchrest Shooters Canada / Re: Dan Opel
« on: June 06, 2020, 08:23:32 PM »
I have hesitated to post fearing I would screw up a tribute to Dan.
Loading next to Dan at a Nationals I said that I had just shot a big one.
He later commented on this saying that's the last time I listen to you.
Wrong, Dan listened to everyone, all the time and had lots of cute comments.
Phil Nick
Loading next to Dan at a Nationals I said that I had just shot a big one.
He later commented on this saying that's the last time I listen to you.
Wrong, Dan listened to everyone, all the time and had lots of cute comments.
Phil Nick
9
Centerfire Discussions / Re: case trimmers
« on: December 07, 2019, 08:29:35 PM »
Most, if not all benchrest shooters use the Wilson case trimmer.
Check out Sinclair International, or maybe contact Dan Opel at Plenty of Patches.
Check out Sinclair International, or maybe contact Dan Opel at Plenty of Patches.
10
Rifles / SOLD ANSCHUTZ 2013 BENCHREST SOLD
« on: November 28, 2019, 03:09:04 PM »
For sale Anschutz 2013
Sits in an older Black Anschutz BR 50 stock
Excellent condition / Aprox. 2000 rnds.
SOLD
Sits in an older Black Anschutz BR 50 stock
Excellent condition / Aprox. 2000 rnds.
SOLD
11
Rimfire Discussions / Re: .22 LR Lot Testing
« on: November 24, 2019, 07:20:02 AM »
Barrel is a benchmark.
Current ammo is Rem. Eley Match.
I tested four lots of it.
The one I picked for a case purchase
was the most consistent in velocity and grouping.
Testing was done over a two day period .
Day two was a repeat of day one testing
except in a different order. Now that I have
a case of ammo maybe there is enough to
set up the tuner.
Current ammo is Rem. Eley Match.
I tested four lots of it.
The one I picked for a case purchase
was the most consistent in velocity and grouping.
Testing was done over a two day period .
Day two was a repeat of day one testing
except in a different order. Now that I have
a case of ammo maybe there is enough to
set up the tuner.
12
Rimfire Discussions / Re: .22 LR Lot Testing
« on: November 23, 2019, 08:53:58 PM »
For what my opinion is worth ( free )
I lot test with the tuner removed.
I lot test with the tuner removed.
13
Rimfire Discussions / Re: starting br 22 lr
« on: November 12, 2019, 02:45:09 PM »
Putting an Anschutz 2013 up for sale.
Sits in an Anschutz Black BR 50 Stock.
$2900.00
lpnick@bell.net
Sits in an Anschutz Black BR 50 Stock.
$2900.00
lpnick@bell.net
14
WBSF - World Benchrest Shooting Federation Events / Re: World Championships in Calgary - July 2019
« on: July 26, 2019, 11:07:15 AM »
Job well done Rick. The work load had to be staggering.
15
Club Events / Re: Benchrest Group Shoot Selkirk,MB May 11-12
« on: May 13, 2019, 07:58:23 PM »
Bitchy, windy.
A well run match.
Many thanks to Grant and Chelsea.
A well run match.
Many thanks to Grant and Chelsea.
16
Centerfire Discussions / Re: Benchrest gunsmith canada?
« on: April 10, 2019, 08:49:07 PM »
Used a recoil lug on my Bordon Rimrock in .30 BR
But then maybe I am not overly adventurous.
But then maybe I am not overly adventurous.
17
BR Equipment + Components / Re: Action Wrench
« on: March 19, 2019, 02:37:29 PM »
Action wrench is sold.
Thanks
Thanks
18
BR Equipment + Components / Action Wrench
« on: March 19, 2019, 10:38:37 AM »
For sale
Action Wrench, Bat 2 lug
$ 75.00 shipped
Action Wrench, Bat 2 lug
$ 75.00 shipped
19
Centerfire Discussions / Re: Does anyone in Canada do neck-turning of large quantities of brass?
« on: February 10, 2019, 08:25:07 PM »
OK, like it or not you are likely going to be in the neck turning business. Luck.
Phil
Phil
20
Centerfire Discussions / Re: Does anyone in Canada do neck-turning of large quantities of brass?
« on: February 10, 2019, 02:59:41 PM »
What method of turning do you use?
A case holder in a drill works fine.
I turn a hundred in a batch, doesn't take long.
Leave your neck turners set for each caliber,
not as much work setting up that way.
Phil
A case holder in a drill works fine.
I turn a hundred in a batch, doesn't take long.
Leave your neck turners set for each caliber,
not as much work setting up that way.
Phil
SMF spam blocked by CleanTalk