41
BRSC - Benchrest Shooters Canada / Re: BRSC Super Shoot August 18/19 2018 - Rosebud
« on: August 13, 2018, 08:50:14 AM »
I will be there, hope we see a bunch of BRSC shooters out for this event.
Where Precision and Accuracy Meet
News:
NEW USERS MUST CONTACT RICKPOLLOCK@SHAW.CA BEFORE LISTING ITEMS FOR SALE
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
42
Plenty O Patches / Web site
« on: August 09, 2018, 09:57:24 AM »
Web site at www.plentyopatches.com
43
BRSC - Benchrest Shooters Canada / Re: Mission - 2018 BRSC Nationals Results
« on: August 07, 2018, 08:50:51 AM »
Congratulations to Hugh on winning the BRSC Championship he is working his way to matching Ted Gaillard’s 5 Championships.
Thank you to the Mission Club for hosting this Championship.
Thank you to the Mission Club for hosting this Championship.
44
Off Topic / Re: Greetings From Ottawa
« on: July 25, 2018, 08:38:42 AM »
Welcome to the forum and the window to BR in Canada.
If you have any questions please let us know.
DanO
If you have any questions please let us know.
DanO
45
BRSC - Benchrest Shooters Canada / Re: Stampede 4-Gun Shootout July 21/22 2018
« on: July 16, 2018, 09:22:14 AM »
We will be there, looking forward to the BBQ.
Should anyone require any products please get your list to us by Wednesday morning and we will be happy to deliver.
DanO
Should anyone require any products please get your list to us by Wednesday morning and we will be happy to deliver.
DanO
46
BRSC - Benchrest Shooters Canada / Re: Mission, BC - BRSC Sanctioned HV Group Shoot - May 6, 2018
« on: May 07, 2018, 09:22:18 PM »
Mark thank you the match report.
Thank you to all the organizers and support folk for the match.
It was nice to get the first BRSC event under the belt.
DanO
Thank you to all the organizers and support folk for the match.
It was nice to get the first BRSC event under the belt.
DanO
47
BR Equipment + Components / Re: ISO Rem700 SS recoil lug .// 6mm blank or BR barrel/ jewel to fit same 700
« on: March 01, 2018, 08:37:35 AM »
Call Dan @ 403-752-4446.
48
Centerfire Discussions / Re: Neck size diameter
« on: February 10, 2018, 09:08:38 AM »
As was stated above neck clearance of .002” is a good target.
If you accurately measure the brass from each chamber you will see how much it differs from each other.
We normally measure the neck, shoulder and base dimensions of the fired and sized brass as the way to match up the sizing die to the chamber. One measurement that doesn’t get the attention it should is the shoulder (tapered part) bump back. It is common to see the dimensions over sized which effects the headspace clearance on sizes brass.
In a target type rifle this should again be in the .002” range of bump back. In a hunting rifle a bit more bump back is recommended to handle adverse environmental conditions.
The closer you can match the sized brass back the chamber dimensions the better it aligns the projectile to the bore.
If you accurately measure the brass from each chamber you will see how much it differs from each other.
We normally measure the neck, shoulder and base dimensions of the fired and sized brass as the way to match up the sizing die to the chamber. One measurement that doesn’t get the attention it should is the shoulder (tapered part) bump back. It is common to see the dimensions over sized which effects the headspace clearance on sizes brass.
In a target type rifle this should again be in the .002” range of bump back. In a hunting rifle a bit more bump back is recommended to handle adverse environmental conditions.
The closer you can match the sized brass back the chamber dimensions the better it aligns the projectile to the bore.
49
Club Events / Re: Mission & District Rod & Gun Club Center Fire Benchrest Schedule 2018
« on: January 08, 2018, 08:42:25 AM »
I believe Phil Nick is planning on attending.
50
Club Events / Re: Mission & District Rod & Gun Club Center Fire Benchrest Schedule 2018
« on: January 04, 2018, 08:05:13 AM »
Thanks guys, have a couple of events penciled in.
51
About This Forum / Re: 8 years!
« on: December 25, 2017, 11:05:42 AM »
Rick, keep it going, we enjoy the site and all that it offers.
DanO
DanO
52
BR Equipment + Components / Re: WTB 6ppc reamer .262
« on: November 18, 2017, 08:11:30 AM »
Curious as to why the interest in a .262" neck?
In the last few years the the majority of reamers are in the .268-.269" range.
If you have a specific reamer dimension you would like you can order one to those specs. without any additional cost.
In the last few years the the majority of reamers are in the .268-.269" range.
If you have a specific reamer dimension you would like you can order one to those specs. without any additional cost.
53
BRSC - Benchrest Shooters Canada / Re: July 15/16 BR Stampede Shootout 100 yd 4-Gun (Sp, LV, HV, Unl)
« on: July 08, 2017, 09:36:21 PM »
We will be there.
If any shooter need products delivered get in touch with us before Thursday.
DanO
If any shooter need products delivered get in touch with us before Thursday.
DanO
54
BRSC - Benchrest Shooters Canada / Re: BRSC National Championships July 1/2 2017 - Selkirk, MB
« on: July 05, 2017, 06:09:36 AM »
Thank you to the Selkirk Club for hosting an excellent shoot.
Congratulations to Phil on his winning the BRSC Nationals.
Congratulations to Phil on his winning the BRSC Nationals.
55
Centerfire Discussions / Re: Is There Consensus on Minimum Amount of Neck/Bullet Contact?
« on: June 04, 2017, 12:37:00 PM »
The amount of bullet in the neck is not a real big concern. With powders like N-133 which seem to like lots of neck tension on the bullet to aid in pressure curve, may be a slight issue.
As you are not using the magazine to feed, I would not worry about the amount of bullet in the neck, just feed the rifle what it shoots well.
If the bullets are flat base you should be fine, a boat tail will have less neck grip due to the reduced bearing surface.
With the dies you are using you should still be able to make minimal runout loads.
I once had a 40XBR that had .010" of bullet grip on a .223 50gr Berger bullet.
It shot pretty good.
You may find that your rifle may like a wee bit of bullet jump, so do test that option.
As you are not using the magazine to feed, I would not worry about the amount of bullet in the neck, just feed the rifle what it shoots well.
If the bullets are flat base you should be fine, a boat tail will have less neck grip due to the reduced bearing surface.
With the dies you are using you should still be able to make minimal runout loads.
I once had a 40XBR that had .010" of bullet grip on a .223 50gr Berger bullet.
It shot pretty good.
You may find that your rifle may like a wee bit of bullet jump, so do test that option.
56
BRSC - Benchrest Shooters Canada / Re: Rosebud Heavy Iron Shoot June 10/11 - 2017
« on: May 30, 2017, 12:39:24 PM »
Count me in.
57
Club Events / BR 201
« on: April 23, 2017, 10:10:58 AM »
Thank you to Rick, Hugh, Wayne and their wives for hosting a great event at the Rosebud range on Saturday.
My feed back is two thumbs up, and the fellow participants that I talk with, all had nothing put positive feed back about the days events.
Wayne provide a new level of understanding about the BR game which was/is muchly appreciated.
Thanks again to all involved.
DanO
My feed back is two thumbs up, and the fellow participants that I talk with, all had nothing put positive feed back about the days events.
Wayne provide a new level of understanding about the BR game which was/is muchly appreciated.
Thanks again to all involved.
DanO
58
BR Equipment + Components / Re: WTB 222 Magnum dies
« on: February 04, 2017, 09:38:08 AM »
Let me check into that for you.
59
BR Equipment + Components / Re: WTB 222 Magnum dies
« on: January 28, 2017, 12:17:41 PM »
Any of the Redding dies you may need.
60
BR Equipment + Components / Re: WTB 222 Magnum dies
« on: January 27, 2017, 01:01:44 PM »
If you don't find any die let me know and I should be able to get you some new Redding Dies.
SMF spam blocked by CleanTalk